Loading ...
Loading ...
Loading ...
360 | Chapter 4. Routing
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
PIM-DM Interface Configuration
To display the PIM-DM Interface Configuration page, click Routing Multicast PIM-DM
Interface Configuration.
1. Interface - The interface for which data is to be displayed or configured. You must have
configured at least one router interface before configuring or displaying data for a
PIM-DM interface.
2. Use Admin Mode to set the administrative status of PIM-DM for the selected interface. The
default is disable.
3. Use Hello Interval to enter the number of seconds between PIM hello messages
transmitted from the selected interface. The default value is 30. Valid values are from 10 to
3600.
Table 65.
Field Description
Protocol State The operational state of the PIM-DM protocol on this
interface.
IP Address The IP address of the selected interface.
Neighbor Count The number of PIM neighbors on the selected
interface.
Designated Router The designated router on the selected PIM interface.
For point-to-point interfaces, this will be 0.0.0.0.
Loading ...
Loading ...
Loading ...