Loading ...
Loading ...
Loading ...
Printer Configuration and Adjustment
Item Description
Control panel key(s):
FACTORY: Hold FEED + PAUSE during printer power-
up to reset the printer parameters to factory values.
NETWORK: Hold CANCEL + PAUSE during printer
power-up to reset the network parameters to factory
values.
LAST SAVED: N/A
Printer web page:
FACTORY: View and Modify Printer Settings > Restore
Default Configuration
NETWORK: Print Server Settings > Reset Print Server
LAST SAVED: View and Modify Printer Settings >
Restore Saved Configuration
Calibrate the printer to adjust the sensitivity of the media and ribbon sensors.
For complete instructions on how to perform a calibration procedure, see
Calibrating the Ribbon and Media Sensors on page 111.
User menu item:
Main Menu > TOOLS
Main Menu > SENSORS
Related ZPL command(s):
~JC
SGD command used:
ezpl.manual_calibration
Control panel key(s):
Hold PAUSE + CANCEL for 2seconds to initiate
calibration.
Media and
Ribbon Sensor
Calibration
Printer web page:
The calibration procedure cannot be initiated through
the web pages. See the following web page for
settings that are set during sensor calibration:
View and Modify Printer Settings > Calibration
IMPORTANT:
Do not change these settings unless you are
told to do so by Zebra Technical Support or
by an authorized service technician.
Table 5Calibration and Diagnostic Tools(Continued)
95
Loading ...
Loading ...
Loading ...