Loading ...
Loading ...
Loading ...
Routine Maintenance
2. Brush, air blow, or vacuum any accumulated paper lint and dust away from the sensors.
1
1 Sensors
Cleaning the Printhead and Platen Roller
Inconsistent print quality, such as voids in the bar code or graphics, may indicate a dirty printhead. For the
recommended cleaning schedule, see
Table 10Recommended Cleaning Schedule on page 122.
CAUTION: While performing any tasks near an open printhead, remove all rings, watches,
hanging necklaces, identification badges, or other metallic objects that could touch the
printhead. You are not required to turn off the printer power when working near an open
printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose all
temporary settings, such as label formats, and you must reload them before you resume printing.
NOTE: For printers with a peel assembly, keep the peel assembly closed while cleaning the
platen roller to reduce the risk of bending the tear#off/peel-off bar.
124
Loading ...
Loading ...
Loading ...