Loading ...
Loading ...
Loading ...
Troubleshooting
Indicator Lights Status
NETWORK light flashing green. WLAN—The radio is
associated with your network and authenticated, but the
WLAN signal is weak.
NETWORK light steady red. A WLAN error condition exists.
The printer is not connected to your network.
Table 11Status of Printer As Shown by Indicator Lights(Continued)
Printing Issues
This table identifies possible issues with printing or print quality, the possible causes, and the
recommended solutions.
Issue Possible Cause Recommended Solution
The printer is set at the
incorrect print speed.
For optimal print quality, set the print speed to
the lowest possible setting for your application
via control panel, the driver, or the software.
You may want to perform the Feed Self Test to
determine the optimal settings for your printer.
See Print Speed for how to change the print
speed.
You are using an incorrect
combination of labels and
ribbon for your application.
Switch to a different type of media or ribbon
to try to find a compatible combination.If
necessary, consult your authorized Zebra
reseller or distributor for information and
advice.
The printer is set at an
incorrect darkness level.
For optimal print quality, set the darkness
to the lowest possible setting for your
application. You may want to perform the
Feed Self Test to determine the ideal darkness
setting.
See Print Darkness for how to change the
darkness setting.
The printhead is dirty. Clean the printhead and platen roller. See
Clean the Printhead and Platen Roller.
General print quality
issues
Incorrect or uneven printhead
pressure.
Set the printhead pressure to the minimum
needed for good print quality. See Adjust the
Printhead Pressure.
Table 12Printing Issues
140
Loading ...
Loading ...
Loading ...