Loading ...
Loading ...
Loading ...
Troubleshooting
Indicator Lights Status
STATUS light steady yellow. The printhead is over
temperature.
CAUTION: The printhead may be hot and could
cause severe burns. Allow the printhead to cool.
STATUS light flashing yellow. This indicator light flashing
indicates one of the following: The printhead is under
temperature. The power supply is over temperature. The
main logic board (MLB) is over temperature.
STATUS light steady red PAUSE light steady redDATA light
steady red. The printhead was replaced with one that is
not a genuine Zebra printhead. Install a genuine Zebra
printhead to continue.
STATUS light flashing red. The printer is unable to read the
dpi setting of the printhead.
Printers with a ZebraNet wired Ethernet option
NETWORK light offNo Ethernet link is available.
NETWORK light steady green. A 100Base-T link was found.
NETWORK light steady yellow. A 10Base-T link was found.
NETWORK light steady red. An Ethernet error condition
exists. The printer is not connected to your network.
Printers with a ZebraNet wireless option
NETWORK light offA radio was found during power-up.
The printer is attempting to associate with the network.
The light flashes red while the printer associates with the
network. The light then flashes yellow while the printer is
authenticating with the network.
NETWORK light steady green. The radio is associated with
your network and authenticated, and the WLAN signal is
strong.
Table 11Status of Printer As Shown by Indicator Lights(Continued)
139
Loading ...
Loading ...
Loading ...