Loading ...
Loading ...
Loading ...
Routine Maintenance
10. Close the media door.
The printer is ready to operate.
11. Press PAUSE to exit pause mode and enable printing.
The printer may perform a label calibration or feed a label, depending on your settings.
Cleaning and Lubricating the Cutter Module
If the cutter is not cutting the labels cleanly or if it jams with labels, clean the cutter.
CAUTION: For personnel safety, always power off and unplug the printer before performing this
procedure.
1. Raise the media door.
2. Turn off (O) the printer and disconnect the AC power cord.
3. Remove media that is loaded through the cutter module.
132
Loading ...
Loading ...
Loading ...