Loading ...
Loading ...
Loading ...
Printer Setup and Operation
7. If media is already loaded, rotate the printhead-open lever downward until it locks the printhead in
place.
Otherwise, continue with Loading the Media on page 29.
8. Close the media door.
9. If necessary, press PAUSE to enable printing.
Loading the Media
Use the instructions in this section for loading roll or fanfold media in any print mode.
CAUTION: While performing any tasks near an open printhead, remove all rings, watches,
hanging necklaces, identification badges, or other metallic objects that could touch the
printhead. You are not required to turn off the printer power when working near an open
printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose all
temporary settings, such as label formats, and you must reload them before you resume printing.
29
Loading ...
Loading ...
Loading ...