Loading ...
Loading ...
Loading ...
Printer Configuration and Adjustment
14. Press PAUSE to enable printing.
15. Press FEED to test if calibration was successful.
If one label feeds correctly each time, the printer is properly calibrated.
Adjusting the Printhead Pressure
You may need to adjust printhead pressure if printing is too light on one side, if you use thick media, or if
the media drifts from side to side during printing. Use the lowest printhead pressure necessary to produce
good print quality.
The printhead pressure adjustment dials have setting marks from 1 to 4 in half#mark increments.
Figure 6Printhead Pressure Adjustment Dials
1
2
1 Inside dial
2 Outside dial
If necessary, adjust the printhead pressure adjustment dials as follows:
If the Media... Then...
Requires higher
pressure to print
well
Increase both dials one position.
Shifts left while
printing
Increase the outside dial setting one position.
117
Loading ...
Loading ...
Loading ...