Loading ...
Loading ...
Loading ...
Printer Setup and Operation
2. Rotate the printhead-open lever downward until it locks the printhead in place.
3. Set the printer toTear-Off mode(for more information, see Print Mode).
4. Close the media door.
5. Press PAUSE to exit pause mode and enable printing.
The printer may perform a label calibration or feed a label, depending on your settings.
6. For optimal results, calibrate the printer. See Calibrating the Ribbon and Media Sensors on page 111.
7. Verify that your printer is able to print a configuration label by holding both the FEED and CANCEL keys
for 2 seconds.
Media loading in Tear-Off mode is complete.
38
Loading ...
Loading ...
Loading ...