Loading ...
Loading ...
Loading ...
Printer Configuration and Adjustment
Print Setting Description
Accepted values: 0 to the maximum label length supported by the
printer
IMPORTANT: Specify a value that is at least
1.0 in. (25.4mm) greater than the actual
label length plus the interlabel gap. If you
set the value to one that is smaller than
the label length, the printer assumes that
continuous media is loaded, and the printer
cannot calibrate.
For example, if the label length is 6.0inches (152mm)
including the interlabel gap, set the parameter for at
least 7.0inches (178mm).
1 Label length (including interlabel gap)
2 Interlabel gap
3 Set the maximum label length to
approximately this value
Related ZPL command(s): ^ML
SGD command used: ezpl.label_length_max
Printer web page:
View and Modify Printer Settings > Media Setup >
MaximumLength
Table 4Print Settings(Continued)
87
Loading ...
Loading ...
Loading ...