Loading ...
Loading ...
Loading ...
Scan using HP printer software (Windows 7)
●
Scan to a computer
●
Scanning documents as editable text
●
Create a new scan shortcut (Windows)
●
Change scan settings (Windows)
Scan to a computer
Before scanning to a computer, make sure you have already installed the HP recommended printer software.
The printer and computer must be connected and turned on.
In addition, on Windows computers, the printer software must be running prior to scanning.
You can use the HP printer software to scan documents into editable text. For more information, see Scan
using HP printer software (Windows 7) .
To scan an original to a computer from the printer control panel
Please make sure the printer has already connected to the computer before scanning.
1. Load your original print-side down on the scanner glass or print-side up in the document feeder.
2. Touch Scan from the control panel, and then select Computer .
3. Select your computer name.
4. Touch Start Scan.
To enable the scan to a computer feature (Windows)
If the printer is connected to the computer with a USB connection, the feature for scanning to computer is
enabled by default and cannot be disabled.
If you are using network connection, follow these instructions if the feature has been disabled, and you wish
to enable it again.
1. Open the HP printer software. For more information, see Open the HP printer software (Windows).
2. Click Print, Scan & Fax , and then click Scan .
3. Select Manage Scan to Computer.
4. Click Enable.
To scan a document or photo to a le (Windows)
1. Load the original print side down on the left rear corner of the scanner glass.
2. Open the HP printer software. For more information, see Open the HP printer software (Windows).
3. In the printer software, click Scan a Document or Photo .
4. Select the type of scan you want and then click Scan .
ENWW Scan using HP printer software (Windows 7) 67
Loading ...
Loading ...
Loading ...