Loading ...
Loading ...
Loading ...
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
Case E: Shared voice/fax line
If you receive both voice calls and fax calls at the same phone number, and you have no other oice
equipment (or voice mail) on this phone line, set up the printer as described in this section.
Figure 8-4 Back view of the printer
1 Telephone wall jack.
2
3 Telephone (optional).
To set up the printer with a shared voice/fax line
1
. Connect one end of the phone cord to your telephone wall jack, then connect the other end to the port
labeled
on the back of the printer.
NOTE: You might need to connect the phone cord to your country/region adapter.
2
. Do one of the following:
● If you have a parallel-type phone system, remove the white plug from the port labeled
on the
back of the printer, and then connect a phone to this port.
● If you have a serial-type phone system, you might plug your phone directly on top of the printer
cable which has a wall plug attached to it.
3. Now you need to decide how you want the printer to answer calls, automatically or manually:
ENWW Additional fax setup 105
Use a minimum 26 AWG phone cord to connect to the port on the printer.
CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger (For example, 24 AWG) UL Listed or
CSA Certified Telecommunications Line Cord.
You might need to connect the phone cord to your country/region adapter.
Loading ...
Loading ...
Loading ...