User Manual - Page 66

For 8034E.

Loading ...
Loading ...
Loading ...
Tips for successful printing
To print successfully, the HP cartridges should be functioning properly with suicient ink, the paper should be
loaded correctly, and the printer should have the appropriate settings.
Ink tips
Paper loading tips
Printer settings tips
Ink tips
Following are the ink tips for successful printing:
If the print quality is not acceptable, see Printing issues for more information.
Use Original HP cartridges.
Original HP cartridges are designed and tested with HP printers and papers to help you easily produce
great results, time after time.
NOTE: HP cannot guarantee the quality or reliability of non-Original HP supplies. Product service or
repairs required as a result of using a non-Original HP supply will not be covered under warranty.
If you believe you purchased Original HP cartridges, go to www.hp.com/go/anticounterfeit.
NOTE: If you have an HP+ printer, you must use Original HP cartridges. If non-Original HP or relled
cartridges are installed, the printer will not be able to print.
Install both the black and color cartridges correctly.
For more information, see Replace the cartridges.
Check the estimated ink levels in the cartridges to make sure there is suicient ink.
For more information, see Check the estimated ink levels.
NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When an
indicator shows low ink levels, consider having a replacement cartridge available to avoid possible
printing delays. You do not need to replace cartridges until you are prompted to.
Always turn o the printer with (the Power button) to allow the printer to protect the nozzles.
Paper loading tips
For more information, also see Load paper.
Ensure the paper is loaded in the input tray properly, and set the correct media size and media type.
Upon loading paper in input tray, you will be prompted to set the media size and media type from the
control panel.
Load a stack of paper (not just one page). All the paper in the stack should be of the same size and type
to avoid a paper jam.
Load paper with the print-side down.
60 Chapter 6 Print ENWW
Loading ...
Loading ...
Loading ...