Loading ...
Loading ...
Loading ...
• Data: triggers on the specified data word. After this trigger condition is selected,
click or tap the comparison conditions in Comp. The available choices include =,
≠, >, <, > <, and < >.
- =: triggers when the channel's data word equals the set data word. Click or
tap the input field of Min, and then the "Format" interface is displayed. You
can set the lower limit of the data word. For details, refer to descriptions in
"
I2C Trigger
".
- ≠: triggers when the channel's data word does not equal the set data word.
Click or tap the input field of Min, and then the "Format" interface is
displayed. You can set the lower limit of the data word. For details, refer to
descriptions in "
I2C Trigger
".
- >: triggers when the channel's data word is greater than the set data word.
Click or tap the input field of Min, and then the "Format" interface is
displayed. You can set the lower limit of the data word. For details, refer to
descriptions in "
I2C Trigger
".
- <: triggers when the channel's data word is smaller than the set data word.
Click or tap the input field of Max, and then the "Format" interface is
displayed. You can set the upper limit of the data word. For details, refer to
descriptions in "
I2C Trigger
".
- < >: triggers when the channel's data word is smaller than the upper limit
of the data word and greater than the lower limit of the data word. Click or
tap the input field of Max and Min, and then the "Format" interface is
displayed. You can set the upper limit and lower limit of the data word. For
details, refer to descriptions in "
I2C Trigger
".
- > <: triggers when the channel's data word is greater than the upper limit
of the data word or smaller than the lower limit of the data word. Click or
tap the input field of Max and Min, and then the "Format" interface is
displayed. You can set the upper limit and lower limit of the data word. For
details, refer to descriptions in "
I2C Trigger
".
• RTA: triggers on the specified remote terminal address. After this trigger
condition is selected, click or tap the input field of
RTA, and then the "Format"
interface is displayed. You can set the remote terminal address. For details, refer
to descriptions in "
I2C Trigger
".
• RTA+11Bit: triggers on the RTA and the remaining 11 bits.
After this trigger condition is selected:
- Click or tap the input field of RTA, and then the "Format" interface is
displayed. You can set the remote terminal address. For details, refer to
descriptions in "
I2C Trigger
".
Triggering the Oscilloscope
DHO4000 User Guide
128
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...