Loading ...
Loading ...
Loading ...
Trigger Type
Click or tap the drop-down button of Type to select "FlexRay".
Figure 8.36 FlexRay Trigger Setting Menu
After a trigger type is selected, the current trigger setting information (including
trigger type, trigger source, and trigger level) is displayed in the trigger information
label at the top of the screen, as shown in the figure below. The information will
change based on the trigger settings.
Source Selection
Click or tap the drop-down button of Source to select CH1-CH4. For details, refer to
descriptions in
Trigger Source
The selected trigger source is indicated in the trigger
information label at the top of the screen.
Only when you select the channel that has signal inputs as the trigger source, can you
obtain a stable trigger.
Baud Rate
You can set the baud rate of the signal. Click or tap the drop-down button Baud to
select a FlexRay baud rate that matches the FlexRay bus signal. The available baud
rates include 2.5 Mbps, 5 Mbps, and 10 Mbps.
Trigger Condition
Click or tap the drop-down button of
When to select the desired trigger condition.
Triggering the Oscilloscope
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
DHO4000 User Guide
117
Loading ...
Loading ...
Loading ...