Loading ...
Loading ...
Loading ...
SHS800 Series 55
Table 4-5 Waveform Recorder Replaying Mode Function Menu
Option Instruction
Stop/Continue
Pause or contnue playing waveform automatically, you can
change the time base to observe the waveform in the
memory.
Restart Replay the waveform
Previous Back the waveform and then play.
Next Speed the playing of the waveform.
Return Exit the replaying menu.
Figure 4-10 Waveform Recorder Setting Menu
Table 4-6 Waveform Recorder Setting Menu
Option Setting Instruction
Viewer
mode
Full screen
Record and replay channel waveform with full
screen
Split
Record and replay channel waveform with divided
screen. The up half of the screen displays CH1
while the down half displays CH2.
Record
mode
continuous
Record circularly, when the waveform recorder is
full, the after data will cover the pre-data.
Single
Stop recording data when the waveform recorder
memory is full.
Replay mode
By Point
When replaying, the screen waveform updates
every dot from left to right.
By frame
When replaying，the screen waveform updates the
whole screen according to the time of sampling
every frame data.
return Exit the recorder setup interface.
Waveform recorder application example
Startup the waveform recorder function:
1. Under 100mS or above time base.
2. Press 【Recorder】 to open the main menu.
3. Press 【F2】 to choose scope recorder.
4. Press 【F3】 to set the waveform recorder. Such as
5. Press 【F5】 to return to the waveform recorder main menu.
6. Press 【F1】 to enter record interface.
7. Press 【F4】 to set storage mode. Interior and USB flash disk storage mode.
Loading ...
Loading ...
Loading ...