Loading ...
Loading ...
Loading ...
32 SHS800 Series
display a waveform until after the first
trigger.
Single
When you want the oscilloscope to acquire
a single waveform, press the “SINGLE ”
button.
Set up Enter the “Trigger setup menu”.
Next Page Page 2/2 Return to the first page of slope trigger.
Alternative trigger
The trigger signal comes from two vertical channels when you use alternative trigger. In
this mode, you can observe two irrelative signals at the same time. You can select
different trigger types for two vertical signals, and selected types cover edge, pulse,
video and slope trigger. Trigger information of two channel signals display on the bottom
right of the screen.
Figure 2-48 Alternative Trigger Menu
Table 2-28 Alternative Trigger Function Menu
Option Setting Instruction
Type Alternative
The trigger signal comes from two vertical channels
when you use alternative trigger. In this mode, you
can observe two irrelative signals at the same time.
Source
CHX
CHY
Set trigger type information for CHX signal
Set trigger type information for CHY signal
Mode
Edge
Pluse
video
slope
Set trigger type of the vertical channel signal
Slope
Triggering on rising edge.
Triggering on falling edge.
Triggering on rising edge and falling edge.
Set up Enter the “Trigger setup menu”.
Loading ...
Loading ...
Loading ...