Loading ...
Loading ...
Loading ...
SHS800 Series 31
Table 2-26 Slope Trigger Function Menu 1
Option Setting Instruction
Type Slope
Trigger on positive slope of negative slope
according to setup time of the oscilloscope.
Source CH1、CH2 Select trigger source.
Condition
Select trigger conditions.
Time
〈Set time〉
Use the arrow keys to set slope time. Time
setup range is 20ns-10s.
Next Page Page 1/2
Enter the second page of the slope trigger
menu.
Figure 2-47 Slope Trigger 2
Table 2-27 Slope Trigger Function Menu 2
Option Setting Instruction
Type Slope
Trigger on positive slope of negative
slope according to setup time of the
oscilloscope.
Vertical
Select the trigger level that can be
adjusted by “LEVEL” knob. You can
adjust “LEVEL A”, “LEVEL B” or
adjust them at the same time.
Mode
Auto
Use this mode to let the acquisition
free-run in the absence of a valid trigger;
This mode allows an un-triggered,
scanning waveform at 100 ms/div or
slower time base settings.
Normal
Use this mode when you want to see only
valid triggered waveforms; when you use
this mode, the oscilloscope does not
Loading ...
Loading ...
Loading ...