Loading ...
Loading ...
Loading ...
II SHS800 Series
Safety Information
Carefully read the following safety information before using the SHS800.
Specific warning and caution statements, where they apply, appear throughout the
manual.
A “Warning” identifies conditions and actions that pose hazard(s) to the user.
A “Caution” identifies conditions and actions that the user should notice.
The following international symbols are used on the SHS800 and in this manual:
Hazardous Protective Warning Earth Ground Power
Voltage Earth Ground Switch
Use only insulated voltage probes, test leads and adapters supplied
with the SHS800, or accessories appointed by the company.
Before use inspect voltage probes, test leads and accessories for
mechanical damage and replace when damaged.
Always connect the battery charge first to the AC outlet before
connecting it to the SHS800.
Do not apply voltages that higher than 600 V from earth ground to any
input when using scope ports in a CAT Ⅲ environment. Do not apply
voltages that higher than 1000 V from earth ground to any input when
using scope ports in a CAT Ⅱ environment.
Do not apply input voltages above the rating of the instrument. Use
caution when using 1:1 test leads because the probe tip voltage will be
directly transmitted to the SHS800.
Do not apply voltages that higher than 300 V from earth ground to any
input when using multimeter ports in a CAT Ⅲ environment. Do not
apply voltages that higher than 600 V from earth ground to any input
when using multimeter ports in a CAT Ⅱ environment.
Do not apply voltages that higher than 300 V from earth ground to the
isolated inputs when using multimeter ports in a CAT Ⅲ environment.
Do not apply voltages that higher than 600 V from earth ground to the
isolated inputs when using multimeter ports in a CAT Ⅱ environment.
Loading ...
Loading ...
Loading ...