Loading ...
Loading ...
Loading ...
4. Click IPv4 Conguration and make the necessary changes.
5. Click Apply.
Assign or change the system password using the Embedded Web Server
Assign an administrator password for access to the printer and the HPEmbedded Web Server so that
unauthorized users cannot change the printer settings.
1. Open the EWS. See Congure the printer using the Embedded Web Server (EWS).
2. Click Settings tab.
3. From the left menu, click Security.
4. Click Password Settings and make the necessary changes.
5. Click Apply.
NOTE: Make note of the password and store it in a safe place.
Change energy-conservation settings
The printer includes several economic features to conserve energy and supplies.
Set the Sleep Mode time
Use the EWS to set the amount of idle time before the printer enters sleep mode.
1. Open the EWS. See Congure the printer using the Embedded Web Server (EWS).
2. Click the Settings tab.
3. From the left menu, click Power Management.
4. Click Sleep Mode and select the desired time.
5. Click Apply.
Change the printer shutdown time and settings
Use the EWS to set the amount of time before the printer shuts down.
1. Open the EWS. See Congure the printer using the Embedded Web Server (EWS).
2. Click the Settings tab.
3. From the left menu, click Power Management.
4. Click Shutdown Mode and select the desired time.
5. Select or clear the option to delay the shutdown.
NOTE:
● When this option is selected the printer will not shut down unless all ports are inactive. An active
network link will prevent the printer from shutting down.
● The default shutdown time is 4 hours.
24
Chapter 5Congure your printer
Loading ...
Loading ...
Loading ...