Loading ...
Loading ...
Loading ...
SIGLENT
SDS1000CFL User Manual 83
Table 2-50 Utility System function menu 2:
Option Setting Introduction
Do self cal
Auto self emendation.
Do Self
Test
Screen Test
Keyboard Test
LED Test
Run the screen detect program
Run the keyboard detect program
Run the dot lighten detect program.
Print Setup
Enter the print setup menu to set print
options.
Printer
The oscilloscope connects to the printer
using USB cable. When you execute
print function, please select “Printer”.
Now the print icon displays on the top of
the screen.
Back USB
USBTMC
The oscilloscope connects to the
computer using USB cable. When you
execute EasyScope software, please
select “USBTMC”. Now the computer
icon displays on the screen.
Next Page
Page 2/4 Press this button to enter third page.
Picture 2.13-3
Table 2-51 Functional Menu of the Utility System 3:
Option Setting Introduction
Update
firmware
You can update the oscilloscope use USB
flash Driver (About need two minutes).
Pass/Fail Pres this button to enter the “Pass/Fail menu”.
Record
Press this button to enter the waveform record
menu.
IP Setting Set the IP Address(see table 2-52)
Next Page
Page 3/4
Press this button to enter last page.
Loading ...
Loading ...
Loading ...