Siglent SDS1000CFL SDS1000CFL User Manual

Loading ...

SIGLENT

SDS1000CFL User Manual 111

Chapter 3 Prompting Messages and

Troubleshooting

3.1 Prompting messages:

■ Trig level at limit! : Mention you that the trigger Level is at a limit when

you turn the Trig level knob.

■ Horizon position at limit! : Mention you that the horizontal position is

at a limit when you turn the horizon position knob.

■ Volts/Div at limit! : Mention you that the vertical voltage have already

touched the Min 2MV/div or the Max 5V/div.

■ Volts position at limit! : The system would display this information

when the vertical position is at a limit.

■ Sec/Div at limit! : Prompts that the Volts/Div is at full range while

turning the vertical scale knob.

■ Holdoff time at limit! : Turn the “Universal” knob when holdoff time has

been to max or min value, now the system will clew this information.

■ Functions isn’t useable! : Under several special modes, the some

functions could not be running.

■ No signal! : The system would clew this information when the signal

could not match the auto set condition. (Using in the auto set)

■ Adjust at limit! : You could adjust the pulse width by the universal knob

till the pulse width has reached min20.0ns or max 10.0s.

■ Location Empty! : If you have no stored waveforms or setups on some

location, the screen will display this information when you press the

“Recall” button on this location.

■ USB Flash Drive Plug In! : This information will appear when you

invert the USB Flash Drive to the USB Host port.

■ USB Flash Drive Pull Out! : This information will appear when you pull

out the USB Flash Drive.

Loading ...

Siglent SDS1000CFL