Loading ...
Loading ...
Loading ...
SIGLENT
SDS1000CFL User Manual 5
1.2 Function checking
When you check whether or not the oscilloscope could work smoothly, please
operate as following:
1. Power On the oscilloscope.
Press “DEFAULT SETUP” to show the result of the self check. The probe default
attenuation is 1X.
Picture 1.2- 1
2. Set the switch to 1X on the probe and connect the probe to channel 1 on the
oscilloscope. To do this, align the slot in the probe connector with the key on the
CH 1 BNC, push to connect, and twist to the right to lock the probe in place.
Connect the probe tip and reference lead to the PROBE COMP connectors
Picture 1.2-2
3．Press “AUTO” to show the 1 KHz frequency and about 3V peak-peak square
wave in couple seconds
Loading ...
Loading ...
Loading ...