Siglent SDS1000CFL SDS1000CFL User Manual

Loading ...

SIGLENT

22 SDS1000CFL User Manual

2.6.2 Using Vertical “Position” knob and “Volt/div” knob

■ Vertical “POSITION” knob

1. Use the Vertical “POSITION” knobs to move the channel waveforms up or

down on the screen. This button’s resolution is variety as per the vertical scale.

2. When you adjust the vertical position of channels waveforms, the vertical

position information will display on the left bottom of screen. For example

“Volts Pos=24.6mV”.

3. Press the vertical “POSITION” knob to set the vertical position to zero.

■ “Volts/div” knob

1. Use the “Volts/div” knobs to control how the oscilloscope amplifies or

attenuates the source signal of channel waveforms. When you turn the

“volts/div” knob, the oscilloscope increases or decreases the vertical size of

the waveform on the screen with respect to the ground level;

2. When you press the “Volt/div” Knob, you can switch “Volt/div” option between

“Coarse” and “Fine”. The vertical scale is made sure by the 1-2-5 step in the

Coarse. Increase in the clockwise, reduce in the anticlockwise. In the fine mode,

the knob changes the Volts/Div scale in small steps between the coarse

settings. Increase in the clockwise, reduce in the anticlockwise.

2.6.3 Math Functions

Math shows the results after +,-,*, / and FFT operations of the.input channels.

Press the MATH button to display the waveform math operations. Press the

MATH button again to remove the math waveform display.

Loading ...

Siglent SDS1000CFL