Loading ...
Loading ...
Loading ...
SIGLENT
104 SDS1000CFL User Manual
Recorder Operation step：
1. Press the UTILITY button to enter “Utility menu”.
2. Press the “Next Page” option button to enter the four page of “Utility menu.
3. Press the “Recorder” button to enter the Recorder manual.
4. Press the “Option” button to select the parameter which you want by yourself
5. Press the “Recorder” button to enter the Record menu and then Press the
“Start” button to start record waveform
6. After finished record waveform, then Press the “Replay” button to view the
recorded waveform.
2.13.10 Remote Control
There are two means to remotely control the oscilloscope:
Use user-defined programming
User can control the oscilloscope by programming through standard SCPI
(Standard Commands for Programmable Instruments) commands. For more
details about commands and programming, Please refer to Programming Manual.
Use PC software offered by SIGLENT or other manufacturers
User can send command to remotely control the oscilloscope through PC software
EsayScope which offered by SIGLENT. Besides, “Measurement & Automation
Explorer” which provided by NI (National Instruments Corporation) also can be
used to control the oscilloscope. This oscilloscope can communicate with a PC by
a USB bus. This part will show how to use EsayScope to remotely control an
oscilloscope by USB interface.
Loading ...
Loading ...
Loading ...