Loading ...
Loading ...
Loading ...
SIGLENT
SDS1000CFL User Manual 13
2.3 Auto setup
The SDS1000CFL Series Digital Storage Oscilloscopes have a Auto Setup
function that identifies the waveform types and automatically adjusts controls to
produce a usable display of the input signal.
Press the AUTO button, and then press the menu option button adjacent to the
desired waveform as follows:
Picture 2-3
Table 2-1 Auto Set function Menu:
Option Description
(Multi-cycle sine)
Auto set the screen and display several
cyc signal.
(Single-cycle sine)
Set the screen and auto display single cyc
signal.
(Rising edge)
Auto set and show the rising time.
(Falling edge)
Auto set and show the falling time.
(Undo Setup)
Causes the oscilloscope to recall the
previous setup.
Auto set determines the trigger source based on the following conditions:
● If multiple channels have signals, channel with the lowest frequency signal.
● No signals found, the lowest-numbered channel displayed when Auto set was
invoked
● No signals found and no channels displayed, oscilloscope displays and uses
channel 1.
Loading ...
Loading ...
Loading ...