Siglent SDS1000CFL SDS1000CFL User Manual

Loading ...

SIGLENT

58 SDS1000CFL User Manual

2.11 Measure System

The Oscilloscope displays the voltage in relation to time and test the wave form

displayed. There are scale, Cursor and auto measure modes.

2.11.1 Scale Measurement

This method allows you to make a quick, visual estimate. For example, you might

look at waveform amplitude and determine that it is a little more than 100 mV. You

can take simple measurements by counting the major and minor graticule

divisions involved and multiplying by the scale factor. For example, if you counted

five major vertical graticule divisions between the minimum and maximum values

of a waveform and knew you had a scale factor of 100mV/div, then you could

easily calculate your peak-to-peak voltage as follows:

5 divisions x 100 mV/division = 500 mV.

2.11.2 Cursor Measurement

Picture 2-50 displays the cursor button on the front-panel for this menu.

Picture 2.11-1

Press the “CURSORS” button to display the “Cursor” Menu.

The cursor measurement has three modes: Manual, Track and Auto Measure.

Loading ...

Siglent SDS1000CFL