Siglent SDS1000CFL SDS1000CFL User Manual

Loading ...

SIGLENT

36 SDS1000CFL User Manual

Operate Instruction:

1. Set up Type

1) Press the “TRIG MENU” button to display “Trigger” menu.

2) Press the “Type” option button to select “Edge”.

2. Set up Source

According to input signal, press the “Source” option button to

select “CH1”, “CH2”,”CH3”,”CH4”,“EXT”, “EXT/5”or “AC Line”.

3. Set up Slope

Press the “Slope” option button to select “ ” , “ ” or “ ”.

4. Set up Trigger mode

Press the “Trigger mode” option button to select “Auto”, “Normal”,

“Single”.

Auto: The waveform refresh at a high speed whether the trigger

condition is satisfied or not.

Normal: The waveform refresh when the trigger condition is satisfied

and waits for next trigger event occurring when the trigger condition is

not satisfied.

Single: The oscilloscope acquire a waveform when the trigger

condition is satisfied and then stops.

5. Set up Trigger coupling

1) Press the “Set up” button to enter the “Trigger Setup Menu”.

2) Press the “Coupling” option button to select “DC”, “AC”, “HF Reject”

or “LF Reject”.

Loading ...

Siglent SDS1000CFL