Siglent SDS1000CFL SDS1000CFL User Manual

Loading ...

SIGLENT

32 SDS1000CFL User Manual

■ Display scan mode：

When the SEC/DIV control is set to100 ms/div or slower and the trigger mode is

set to Auto, the oscilloscope enters the scan acquisition mode. In this mode, the

waveform display updates from left to right. There is no trigger or horizontal

position control of waveforms during scan mode.

2.7.2 Window Zone

Use the Delayed option to define a segment of a waveform to see more detail. The

Window time base setting cannot be set slower than the Main time base setting.

You can turn the Horizontal Position and SEC/DIV controls to enlarge or minish

waveforms in the Window Zone.

“M” Mean main time base, “W” mean window time base.. It is also a arrow on the

scale top to show the vertical position.

If you want to see a section of the waveform in detail, follow these steps:

(1) Press the “HORI MENU” button to enter the “Horizontal menu”.

(2) Turn the “SEC/DIV” knob to change the main timebase scale.

(3) Press the “Delayed” option button to select “ON”.

Picture 2.7-2

(4) Turn the “Horizontal position” knob (adjust window’position) to select

the window that you need and expanded window waveform display on

the below half screen at the same time.

Loading ...

Siglent SDS1000CFL