Loading ...
Loading ...
Loading ...
SIGLENT
16 SDS1000CFL User Manual
2.6 Vertical System
The vertical control could be used for displaying waveform, rectify scale and
position.
Picture 2.6-1
2.6.1 CH1, CH2, CH3, CH4 Channel
Table 2-1 CH1,CH2,CH3,CH4 function menu 1:
Option Setting Introduction
Coupling
DC
AC
GND
DC passes both AC and DC components of
the input signal.
AC blocks the DC component of the input
signal and attenuates signals below 10 Hz.
GND disconnects the input signal.
BW limit
On
Off
Limits the bandwidth to reduce display
noise; filters the signal to reduce noise and
other unwanted high frequency
components.
Volts/Div
Coarse
Fine
Selects the resolution of the Volts/Div knob
Coarse defines a 1-2-5 sequence.
Fine changes the resolution to small steps
between the coarse settings.
Probe
1X,5X
10X,50X
100X,500X,
1000X
Set to match the type of probe you are using
to ensure correct vertical readouts.
Next Page Page 1/3 Enter the second page of the menu.
Vertical
Position
knob
Volt/div knob
Loading ...
Loading ...
Loading ...