Loading ...
Loading ...
Loading ...
74
NOTE
1. Ensure the original sensor will not interfere with the relearn procedures. It is
recommended to keep the original sensor at a distance of more than 100 meters
away from the vehicle, or put the sensor in an enclosed metal box to avoid signal
interference.
2. Normally, it is not necessary to perform the relearn procedures after cloning.
However, for some vehicle brands like Porsche, Maserati, may need to perform the
relearn procedures after cloning, so that the TPMS system can work properly.
Retrofit Operations
A TPMS retrofit is only required if your vehicle is not installed with a TPMS system by
default. Tap the TPMS retrofit tab on the TPMS Service Menu Screen to access the
function.
Prior to using this function, ensure the ignition light is in the ON position with the VCI
successfully connected to the vehicle and the tablet.
Figure 5-30 TPMS Retrofit Screen
To perform the retrofit function
1. Tap the TPMS retrofit tab.
2. Follow the instructions displayed on the screen, which will guide you to choose
the procedure, including the Back-up, Retrofit, Restore, Program Autel ECU,
Autel ECU Relearn and Service Function buttons.
After the retrofit function is finished, tap on the other tabs to perform optional
functions.
Loading ...
Loading ...
Loading ...