Loading ...
Loading ...
Loading ...
71
NOTE
If you have performed both Check and Read IDs from Vehicle functions, you can select
either Copy by Activation or Copy by OBD to program the retrieved sensor ID to the
MX-Sensor.
Auto Create
This function is designed to program the MX-Sensor by applying random IDs created
according to the vehicle, when it is unable to obtain the original sensor ID.
To Auto Create
Tap the Programming tab.
Select the specific wheel on the screen.
Tap the Auto Create function button on the screen.
A message with sensor ID will prompt. Place the proper MX-Sensor near the
top right of the tablet and tap OK to write the new created sensor ID into the
MX-Sensor.
After programming is finished, the new programmed MX-Sensor ID will
display on Column 2 of the table.
NOTE
It is necessary to perform Relearn procedure after installing the new MX-Sensor
programmed by the way of Auto Create.
Copy by Input
This function allows you to manually enter sensor IDs. You can enter a random ID or the
original sensor ID.
NOTE
Do not enter the same ID for different sensors.
To copy by input
Tap the Programming tab.
Select the specific wheel on the screen.
Tap the Copy by Input button.
Enter the characters in the prompted screen. Tap OK to finish and save the
sensor ID, or No to exit.
NOTE
Sensors from different manufacturers may have different ID character length limits. The
tablet will automatically recognize character length of the OEM sensor ID, and prevent
further input into the textbox when the limit is reached.
Loading ...
Loading ...
Loading ...