Loading ...
Loading ...
Loading ...
73
Automatic Relearn
Automatic Relearn requires driving to complete. For some vehicle models, the Automatic
Relearn procedures can be completed directly by driving, while for some vehicle models,
you need to follow the onscreen Learning Process Guide to let the vehicle enter the
Automatic Relearn mode before driving.
Figure 5-29 Relearn Function Main Screen
Stationary Relearn
Stationary Relearn can be completed without relying on driving and the OBD diagnostics.
To activate this mode, it is usually necessary to perform a series of operations to let the
vehicle enter the relearn mode first, then use TPMS tools to perform activation or
deflation to complete relearn. The Stationary Relearn operation procedures vary by
vehicle models, please carefully read the onscreen Learning Process Guide before
performing Stationary Relearn mode.
Stationary Relearn requires the vehicle to be placed in the “Learn Mode” after each new
sensor is triggered.
Tap Trigger to activate the new sensor first. Then follow the Learning Process Guide
to perform Stationary Relearn.
Copy Relearn
Copy Relearn is to clone the sensor ID and tire location. Before performing Copy Relearn,
it is necessary to obtain the sensor ID and tire location that need to be cloned, then use
Autel tools to clone and program the sensor ID, and install the sensor to the
corresponding tire to complete Copy Relearn.
Loading ...
Loading ...
Loading ...