Loading ...
Loading ...
Loading ...
72
Place the proper MX-Sensor near the top right of the tablet and tap OK to
start programming.
Relearn Operations
This function allows quick access to the vehicle’s ECU, performing TPMS diagnostics,
reading IDs from vehicle, writing IDs to the vehicle and reading/clearing codes of tire
pressure monitoring system.
Figure 5-28 Relearn Function Main Screen
The OEM sensor information and specification, and relearn procedure for each vehicle
will display on the right side of the screen. Please read the relearn procedure carefully
before performing the relearn function.
To perform TPMS Relearn function
Establish the communication with the vehicle via the VCI. Power on the tablet.
Turn the ignition ON but do not start the engine.
Tap the Relearn tab on the screen and select the specific function to continue.
Details are explained in the following sections.
OBD Relearn
OBD Relearn is completed via the OBD diagnostics function without needing to drive,
and the relearn procedures are basically the same for different models. Thus, we highly
recommend you use this time-saving and efficient relearn method.
The OBD Relearn function allows the MK906 Pro-TS tablet to directly write the TPMS
sensor IDs into the TPMS module.
NOTE
Make sure all sensors are successfully triggered before performing the OBD Relearn
function.
Loading ...
Loading ...
Loading ...