Loading ...
Loading ...
Loading ...
45
Figure 4-16 Active Test Screen
The function buttons at the lower-right corner of the Active Test screen manipulate the
test signals. The operational instructions are displayed on the main section of the test
screen. Simply follow the on-screen instructions and make appropriate selections to
complete the tests. Each time when an operation is successfully executed, message
such as “Command Finished”, “Activation Successful”, or something similar displays.
Tap the ESC function button to exit the test when finished.
Special Functions
These functions perform various component adaptations, allowing you to recalibrate or
configure certain components after making repairs or replacement.
The main section of the Adaptation Operation screen displays a list of operational and
vehicle status information, which mainly consists of four parts:
The first part in the top line shows the description of the operation being performed,
and the execution status is displayed on the right, such as Completed, Activated,
etc.
The second part shows the preconditions or requirements for executing the
operation being selected.
The third part displays the current conditions of the vehicle control module being
learned for comparison to the preconditions suggested by the second part. If the
current condition of the control module is out of the suggested limit value, you must
adjust the vehicle condition to meet the requirement.
The last part displays the instruction of how to use the function button at the lower
right corner of the screen to manipulate the teach-in operations.
Loading ...
Loading ...
Loading ...