Loading ...
Loading ...
Loading ...
39
Display Mode
There are 4 types of display modes available for data viewing, allowing you to view
various types of parameters in the most suitable way.
Tap the drop-down button on the right side of a parameter to open a submenu. A total of
7 buttons will be displayed: The 4 buttons to the left represent different data display
modes, plus one Information button, active when additional information is available, and
one Unit Change button, for switching the unit of displayed data, and one Trigger button,
tap to open the "Trigger Settings" screen.
Figure 4-12 Display Mode Screen
Each parameter item displays the selected mode independently.
Analog Gauge Mode — displays the parameters in form of an analog meter graph
Text Mode — default displays the parameters in texts and shows in list format
NOTE
Reading of status parameters, such as a switch reading, which are mostly in word form,
like ON, OFF, ACTIVE, and ABORT, etc., can only be displayed in Text Mode. Whereas
reading of value parameters, such as a sensor reading, can be displayed in text mode
and other graph modes.
Waveform Graph Mode — displays the parameters in waveform graphs
When this mode is applied, five control buttons will appear on the right side of the
parameter item, allowing you to manipulate the display status.
Loading ...
Loading ...
Loading ...