Loading ...
WARRANTY ON CRAFTSMAN STATIONARY TOOL
If this stationary tool fails due to a defect in material or workmanship within one year from the date
of purchase, CONTACT THE NEAREST SEARS SERVICE CENTER iN THE UNITED STATES and
Sears will repair it free of charge.
This warranty applies only while this product is in the UnReal States.
If this Table Saw is used for commercial or rental purposes, this warranty will apply for ninety days
from the date of purchase.
rhis warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Sears, Roebuck and Co., !)/817 WA Hoffrnan Estates, IL. 60179
Safety Instructions For Table Saw ......
Safety is a combination of common sense, staying alert and knowing how your table saw works. Read this manual to
understand this table saw.
Safety Signal Words WARNING: means if the safety information is not followed
DANGER: means if the safety information is not followed someone could be seriously injured or killed.
someone will be seriously injured or killed. CAUTION: means if the safety information is not followed
someone may be injured.
i i u
Before Using The Saw
• Review the maintenance methods for this saw (See
"Maintaining Your Table Saw" section)).
° Find and read all the warning labels found on the saw
(shown below).
t ' " = I
Completely assemble and align saw (See Assembly
seCtion!).
i'Leam the use and function of the ON-OFF switch
blade guard, spreader, anti-kickback device, miter
gauge, rip fence, table insert, blade elevation and
blade tilt controls (See "Getting to Know Your Table
Saw" section).
-Review and understand all safety instructions and
operating procedures in this manual.
_1 1. Read manual before using saw. 8. Know how to reduce the risk of kickback.
I 2. WearsafetygogglestilatmeetANSI7.87.1Stsndllrde. SeeInstructionsfordpplng.
E2_17 I 3. DO not reach around or oviw saw blade. 9. When ripping, use push block and auxiliary fence when
J4. Keap blade guard down end in place for through cuts. fence Is set belwean 1t2 lind 2 inches from blado.
5. Do not do treehind cuts. Do not mike rip cuts narrower than 1/2 Inch.
I 6. Keep hands out of path of saw blade. . 10. Turn power off and wait for blade to stop
17. _ ripping, USe push stick when lence I= set before adJuMlng or all, Vicing.
_. , .2.inches or more from b!_. •
, ,,,
When Installing OrMoving The Saw
Avoid Dangerous Environment. improper accessoriesmay cause riskof injuryto persons.
-Usethe saw ina dry, indoor place protected from rain. To avoid injury from unexpected saw movement.
• Keep work area well lighted. - Bolt or clamp the saw to firm level surface where there is_
• Use recommended accessories. Consult the owner's plenty of room to handle and properly support the work-_
manual for recommended accessories. The use of piece (See "Assembly-Mounting Your Saw" section).
Loading ...
Loading ...
Loading ...