Loading ...
Loading ...
Loading ...
OVEN DOOI
o NEVER place excesswe weight on
or stand on an open oven door. This
could cause the range to tip over.
break the door. or injure the user.
° NEVER attempt to open or close
door or operate oven until door is
° N EVER place fingers between hinge
and front oven frame. Hinge arms
are spring mounted. Jf acddentaIUy
hit. the hinge will slam shut against
oven frame and couUd injure your
fingers.
TO REMOVE:
I. When cool, open the oven door to the
broil stop position (opened about four
inches).
2. Grasp door at eachside. Do not usethe
door handle to lift door.
3. Lift up evenly until door clears hinge
arms.
TO REPLACE:
l° Grasp door at each side.
2. Align slots in the door with the hinge
arms on the range.
3. Slide the door down Ohm the hinge
arms until the door is completely seated
on the hinges. Push down on the top
corners of the door to completely seat
door on hinges. Door should not ap-
pear crooked.
NOTE: The oven door on a new range may
feel "spongy" when it is closed. This is
normal and will decrease with use.
©WENW NDOW
TO PROTECT THE OVEN DOOR
WINDOW:
I. Do not hit the glass with pots, pans,
furniture, toys, or other objects.
2 Do not close the oven door until the
oven racks are in place.
Scratching,hitting, jarring or stressingthe
glassmayweaken its structure causingan
increased risk of breakage at a later date.
LEVELINC LEGS
" Besure the anti-tip bracket securesone
of the rear levelinglegsto the floor. This
bracket prevents the rangefrom acciden-
OvEN L (;H'P
To assurethe proper replacement bulb is
used, order bulb from Maytag Customer
Service. CaN 1-800-688-8408, askforpar¢:
number 74004458 - halogen bul&
" Disconnect power to range before
Al!ow oven to cool before rep!adng
cool before touching,
TO REPLACE OVEN UGNT BULB:
l. When oven is cool, use fingertips to
grasp edge of bulb cover. Pull out and
remove.
2_
3.
Carefully remove old bulb by pulling
straight out of ceramic base.
To avoid damagingor decreasingthe life
of the new bulb, do not touch the bulb
with bare handsor fingers. Hold with a
cloth or paper towel. Push new bulb
prongs straight into small holes of
ceramic base.
4. Replace bulb cover by snapping into
place.
S. Reconnect power to the range. Reset
clock.
The rangeshould be leveledwhen installed.
[f the range is not [eve[, turn the plastic
leveling legs, located at each corner of the
range, until range is[eveL _
I_g_P BRACKET
\ LEVELING LEG
20
Loading ...
Loading ...
Loading ...