Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 73
3. Swing the frame bracket around the side of
the door frame, and insert the fasteners
from underneath. Tighten with the
#T40
Torx head driver until they are snug,
bei
ng careful not to cross-thread the
fasteners or overtighten. Refer to the
following table for the appropriate torque
specifications for the door frame fasteners.
Tighten Fasteners
4. Set the rear door frame pin into the hole on
to
p of the body side, just behind the rear
door opening.
5. Carefully position the top of the door frame
on
to the rear belt rail and the rear of the
front door frame, making sure the rubber
seals lay flat. Ensure the seals are installed
correctly to avoid water leaks.
Position Of Frame Above Belt Rail
Position Of Rear Frame On Front Frame
6. Insert the fasteners from underneath.
Ti
ghten with the #T40 Torx head driver until
the
y are snug, being careful not to
cross-thread the fasteners or overtighten.
Refer to the previous table for the appro
-
priate torque specifications for the door
fra
me fasteners.
Torque
Spe
cification
For Torx
Fasteners
Maximum Minimum
8.8 in-lbs 11.0 in-lbs 6.6 in-lbs
12 N·m 15 N·m 5 N·m
CAUTION!
Do not overtighten Torx fasteners. You can
strip the fasteners if they are overtightened.
2
Loading ...
Loading ...
Loading ...