Loading ...
Loading ...
Loading ...
66 GETTING TO KNOW YOUR VEHICLE
10. Before driving the vehicle with the top in the
Sunrider® position, ensure the top is
secured with the provided hook-and-loop
fasteners. For instructions on how to raise
the soft top, refer to “Raising The Soft Top”
in this section.
Secured Top In Sunrider® Position
Removing The Soft Top
1. Fully lower the soft top. Refer to “Lowering
The Soft Top” in this section.
2. Using the provided #T50 T
orx head driver
and ratchet, unscrew the two Torx head
fasteners on the inside of each top mecha
-
nism.
Step Two
3. Utilizing two people, lift the soft top up and
aw
ay from the vehicle, careful to avoid the
vehicle’s sport bar and trim. Store the soft
top in a safe, clean, and dry location.
4. Remove the door frames. The rear door
fr
ames must be removed before the front
door frames. Refer to “Door Frame
Removal” in “Getting To Know Your Vehicle”
for removal instructions.
5. Using the provided #T50 T
orx head driver
and ratchet, unscrew the six Torx head
fasteners on both rear corners and the back
of the cab, then remove the belt rail.
NOTE:
Folding down the rear seats is recommended to
pro
vide easier access to the fasteners.
Belt Rail Fasteners
CAUTION!
Failure to follow the next steps could result in
damage to the soft top or vehicle.
1 — Rear Fasteners
2 — Corner Fasteners
Loading ...
Loading ...
Loading ...