Loading ...
Loading ...
Loading ...
112 GETTING TO KNOW YOUR INSTRUMENT PANEL
Unless reset, this message will continue to
display each time you place the ignition in the
ON/RUN position. To turn off the message
temporarily, push and release the OK button. To
reset the oil change indicator system (after
performing the scheduled maintenance), refer
to the following procedure.
Oil Life Reset
1. Without pushing the brake pedal, place the
ig
nition in the ON/RUN mode (do not start
the engine).
2. Navigate to "Oil Life" submenu in "Vehicle
In
fo" in the instrument cluster display.
3. Push and hold the OK
button until the gauge
resets to 100%.
Secondary Method For Oil Change Reset
Pro
cedure
1. Without pushing the brake pedal, place the
ig
nition in the ON/RUN position (do not
start the engine).
2. Fully press the accelerator pedal, slowly,
th
ree times within ten seconds.
3. Without pushing the brake pedal, place the
ig
nition in the OFF/LOCK position.
NOTE:
If the indicator message illuminates when you
sta
rt the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.
Off Road+ Display — If Equipped
When the Off Road+ button is pushed in the
switch bank, the Instrument Cluster Display will
begin to show messages related to the feature.
Depending on the Four Wheel Drive mode in
use, the messages will differ, and after five
seconds, all messages will clear from the
display. The messages are as follows:
2H: Off Road+ Unavailable, Shift to 4WD
4H: 4WD High Off Road+ Active
4L: 4WD Low Off Road+ Active
Adaptive Cruise Control (ACC) and Speed
Con
trol are not available when using Off Road+.
If either option is selected, a dedicated
message will display indicating that the
features are not usable concurrently. Messages
are as follows:
4H: Speed Control — Cruise Control
Unavailable in Off Road+
4H: Adaptive Cruise Control — Adaptive
Cruise Control (ACC) Unavailable in Off
Road+
4L: Speed Control — Cruise Control
Unavailable in 4WD Low
4L: Adaptive Cruise Control — Adaptive Cruise
Control (ACC) Unavailable in 4WD Low
NOTE:
The behavior of Electronic Stability Control while
in
Off Road+ varies depending on the 4WD
status. If the vehicle is in 4H, Traction Control is
automatically turned off. Also, holding the ESC
Off button for five seconds will turn off ESC. In
4L, Electronic Stability Control automatically
shuts off regardless of the Off Road Status.
Loading ...
Loading ...
Loading ...