Loading ...
Loading ...
Loading ...
226 STARTING AND OPERATING
To Set A Desired ACC Speed
When the vehicle reaches the speed desired,
push the SET (+) button or the SET (-) button and
release. The instrument cluster display will
display the set speed.
If the system is set when the vehicle speed is
bel
ow 20 mph (32 km/h), the set speed shall be
def
aulted to 20 mph (32 km/h). If the system is
set
when the vehicle speed is above 20 mph
(32
km/h), the set speed shall be the current
spe
ed of the vehicle. On vehicles equipped with a
manual transmission, the system cannot be set
when the vehicle speed is below 20
mph
(32 km/h) or when the vehicle is in first gear.
NOTE:
ACC cannot be set if there is a stationary vehicle
in
front of your vehicle in close proximity.
Remove your foot from the accelerator pedal. If
you
do not, the vehicle may continue to
accelerate beyond the set speed. If this occurs:
The message “DRIVER OVERRIDE” will display
in the instrument cluster display.
The system will not be controlling the distance
between your vehicle and the vehicle ahead.
The vehicle speed will only be determined by
the position of the accelerator pedal.
To Cancel
The following conditions cancel the system:
The brake pedal is applied
The CANC button is pushed
An Anti-Lock Brake System (ABS) event occurs
The gear selector is removed from the DRIVE
position
The Electronic Stability Control/Traction
Control System (ESC/TCS) activates
The vehicle parking brake is applied
Driver seatbelt is unbuckled at low speeds
Driver door is opened at low speeds
The braking temperature exceeds normal
range (overheated)
A Trailer Sway Control (TSC) event occurs
The vehicle speed is less than 15 mph
(24 km/h) (manual transmission only)
The clutch is depressed for more than 10
seconds (manual transmission only)
The vehicle is placed in NEUTRAL for more
than 10 seconds (manual transmission only)
The driver shifts to 1st gear (manual
transmission only)
To Turn Off
The system will turn off and clear the set speed in
memory if:
The Adaptive Cruise Control (ACC) on/off
button is pushed
The Normal (Fixed Speed) Cruise Control on/
off button is pushed
The ignition is placed in the OFF position
You switch to Four-Wheel Drive Low
WARNING!
Leaving the Adaptive Cruise Control (ACC)
system on when not in use is dangerous. You
could accidentally set the system or cause it
to go faster than you want. You could lose
control and have a collision. Always leave the
system off when you are not using it.
Loading ...
Loading ...
Loading ...