Loading ...
Loading ...
Loading ...
446 MULTIMEDIA
The Jeep wireless speaker contains a
lithium-ion rechargeable battery. Typical
charging temperatures for these types of
batteries are from 32 to 113°F (0 to 45°C).
NOTE:
The functions described are for when the Jeep
wir
eless speaker is undocked from the vehicle.
When plugged into the docking station, the Jeep
wireless speaker functions as part of the
vehicle’s sound system.
Phone & Bluetooth® Pairing
A feature of the Jeep wireless speaker is the
ability for the Jeep wireless speaker to connect
to devices using Bluetooth®. Follow these
simple steps to connect a Bluetooth®-enabled
device to the Jeep wireless speaker:
1. Press and hold the power button for 2-3
se
conds to turn the Jeep wireless speaker
on.
2. Turn “on” Bluetooth® for the device you
de
sire to be connected to the Jeep wireless
speaker. For instructions on how to turn on
and off Bluetooth® settings for the desired
device, refer to the device’s user manual.
3. When powered on, the Jeep wireless
sp
eaker will automatically enter pairing
mode. To pair a second device, press and
hold the Bluetooth® button for 2-3
seconds, until an audio cue is heard. Then
go to the devices’ Bluetooth® settings and
select “Jeep Speaker” from the list.
The Jeep wireless speaker will remember the
las
t eight devices it has paired with.
NOTE:
If the Jeep wireless speaker is left on with an
i
na
ctive Bluetooth® connection for 30 minutes,
it
will automatically turn off. The Jeep wireless
speaker can be turned on again by pressing and
holding the power button for 2-3 seconds.
Resetting Your Jeep Wireless Speaker
To reset the Jeep wireless speaker to its original
factory setting, press and hold the reset button
under the back cover for 8-10 seconds.
Speakerphone
The speakerphone feature can be used by
pressing the “Voice Control” button on the Jeep
wireless speaker. This feature can be used to
answer and end calls over the speakerphone.
Volume And Playback Control
Volume can be increased or decreased by
briefly pressing the + button or - button. When
the maximum volume is reached, an audio cue
will sound.
To skip to the next track, press and hold the +
but
ton. To go to the previous track, press the -
button.
Qualcomm TrueWrieless™ Stereo
A feature of the Jeep wireless speaker is being
able to pair two Jeep wireless speakers together
for Qualcomm TrueWireless™ Stereo. This
feature allows for two Jeep wireless speakers to
play left and right stereo sound.
Below are the steps needed for Qualcomm
Tru
eWireless™ Stereo:
1. Push and hold the power button on both
Je
ep wireless speakers until both speakers
turn on.
2. Place both speakers into Qualcomm True-
Wi
reless™ Stereo pairing mode. This can be
ach
ieved by pressing and holding the
Battery Status button on both speakers
until an audio notification is heard from
both speakers.
Loading ...
Loading ...
Loading ...