User Manual - Page 250

For 2020 Gladiator.

Loading ...
Loading ...
Loading ...
248 STARTING AND OPERATING
Manual Activation Of The Rear View Camera
1. Go to the Controls screen by pressing the
“C
ontrols” button located on the bottom of
the Uconnect display, and then press
“Backup Camera”.
2. Press the “Backup Camera” button to turn
th
e Rear View Camera system on.
NOTE:
For vehicles equipped with the Uconnect 3 With
5-I
nch Display, there is only one option for
manual activation of the Rear View Camera.
Press the “More” hard button on the Uconnect
system, and then press “Backup Camera”.
When the vehicle is shifted out of REVERSE
(wi
th Camera delay turned off), the rear Camera
mode is exited and the previous screen appears
again.
When the vehicle is shifted out of REVERSE
(wi
th Camera delay turned on), the rear Camera
image will be displayed for up to 10 seconds
unless the vehicle speed exceeds 8
mph
(13
km/h), the transmission is shifted into
PAR
K, the ignition is placed in the OFF position,
or the touchscreen button X” to disable display
of the Rear View Camera image is pressed.
Whenever the Rear View Camera image is
act
ivated through the "Backup Camera" button
in the "Controls" menu, and the vehicle speed is
greater than, or equal to 8
mph (13 km/h), a
dis
play timer for the image is initiated. The
image will continue to be displayed until the
display timer exceeds 10 seconds.
NOTE:
If the vehicle speed remains below 8 mph
(13 km/h), the Rear View Camera image will
be
displayed continuously until deactivated
via the touchscreen button "X", the
transmission is shifted into PARK, or the
ignition is placed in the OFF position.
The touchscreen button "X" to disable display
of the camera image is made available ONLY
when the vehicle is not in REVERSE.
When enabled, active guide lines are overlaid
on
the image to illustrate the width of the
vehicle and its projected backup path based on
the steering wheel position. A dashed center
line overlay indicates the center of the vehicle to
assist with parking or aligning to a hitch/
receiver.
When enabled, fixed guide lines are overlaid on
the
image to illustrate the width of the vehicle.
Different colored zones indicate the distance to
the
rear of the vehicle.
The following table shows the approximate
dis
tances for each zone:
Trailer Hitch Zoom
If equipped, the Trailer Hitch Zoom feature aids
the
driver in lining up a trailer to the vehicle’s
trailer hitch by allowing the driver to toggle back
and forth between the normal view and a 4X
zoom mode by pressing the “magnifying glass”
icon on the touchscreen. The image is displayed
on the radio screen when the transmission is
shifted into REVERSE, as well as manually in
certain situations through the controls screen.
Zone
Distance To The Rear
Of
The Vehicle
Red 0 - 1 ft (0 - 30 cm)
Yellow
1 ft - 6.5 ft
(30
cm - 2 m)
Green
6.5 ft or greater
(
2 m
or greater)
Loading ...
Loading ...
Loading ...