Loading ...
Loading ...
Loading ...
38 GETTING TO KNOW YOUR VEHICLE
To return the head restraint to its upward
position, lift up on the head restraint until it
locks into place.
To raise the center head restraint, lift up on the
hea
d restraint. To lower the center head
restraint, push the adjustment button, located
at the base of the head restraint, and push
down on the head restraint.
To remove the center head restraint, raise it as
far
as it can go. Then, push the adjustment
button and the release button at the base of
each post while pulling the head restraint up.
To reinstall the head restraint, put the head
res
traint posts into the holes and push
downward. Then, adjust it to the appropriate
height using the adjustment button. Refer to
“Occupant Restraint Systems” in “Safety” for
information on child seat tether routing.
NOTE:
Lower the center head restraint to avoid contact
wit
h the center console when folding the seat
down.
STEERING WHEEL
Tilt/Telescoping Steering Column
The Tilt/Telescoping Steering Column feature
allows the steering column to tilt upward or
downward, and lengthen or shorten the steering
column. The Tilt/Telescoping lever is located on
the steering column, below the turn signal lever.
Tilt/Telescoping Steering Column Lever
To unlock the steering column, push the Tilt/
T
el
escoping lever downward (toward the floor).
To tilt the steering column, move the steering
wheel upward or downward as desired.
To lengthen or shorten the steering column, pull
the
steering wheel outward or push it inward as
desired.
WARNING!
Do not drive the vehicle without the rear
seat head restraints installed while
passengers are occupying the rear seat. In
a collision, people riding in this area without
the head restraints installed are more likely
to be seriously injured or killed.
A loose head restraint thrown forward in a
collision or hard stop could cause serious
injury or death to occupants of the vehicle.
Always securely stow removed head
restraints in a location outside the
occupant compartment.
ALL the head restraints MUST be
reinstalled in the vehicle to properly protect
the occupants. Follow the reinstallation
instructions above prior to operating the
vehicle or occupying a seat.
Loading ...
Loading ...
Loading ...