Loading ...
Loading ...
Loading ...
SERVICING AND MAINTENANCE 321
Wiper Blade Removal/Installation
1. Lift the wiper arm to raise the wiper blade
off of the glass, until the wiper arm is in the
full up position.
Wiper Blade With Release Tab In Locked Position
2. To disengage the wiper blade from the wiper
ar
m, press the release tab on the wiper
blade, and while holding the wiper arm with
one hand, slide the wiper blade down
towards the base of the wiper arm.
Wiper Blade With Release Tab In Unlocked Position
3. W
ith the wiper blade disengaged, remove
th
e wiper blade from the wiper arm.
4. Gently lower the wiper arm onto the glass.
In
stalling The Front Wipers
1. Lift the wiper arm off of the glass, until the
wi
per arm is in the full up position.
2. Position the wiper blade near the hook on
th
e tip of the wiper arm.
3. Insert the hook on the tip of the arm through
th
e opening in the wiper blade.
4. Slide the wiper blade up into the hook on
th
e wiper arm, latch engagement will be
accompanied by an audible click.
5. Gently lower the wiper blade onto the glass.
Exhaust System
The best protection against carbon monoxide
entry into the vehicle body is a properly
maintained engine exhaust system.
If you notice a change in the sound of the
exh
aust system, or if the exhaust fumes can be
detected inside the vehicle, or when the
underside or rear of the vehicle is damaged,
have an authorized technician inspect the
complete exhaust system and adjacent body
areas for broken, damaged, deteriorated, or
mispositioned parts. Open seams or loose
connections could permit exhaust fumes to
CAUTION!
Do not allow the wiper arm to spring back
against the glass without the wiper blade in
place or the glass may be damaged.
1 — Wiper Blade
2 — Wiper Arm
3 — Release Tab
1 — Wiper Blade
2 — Wiper Arm J Hook
3 — J Hook Retainer
7
Loading ...
Loading ...
Loading ...