Loading ...
Loading ...
Loading ...
#
Make sure that the seat backrest and
the rear bench seat/rear seat are
engaged before every trip.
If the seat backrest is not engaged and locked,
this will be shown on the multifunction display
on the instrument cluster.
When installing a belt-secured child restraint
system, observe the following:
O
Always comply with the manufacturer's
installation and operating instructions for
the child restraint system used.
O
When using a category 0/0+ baby car
seat and a category I rearward-facing
child restraint system on a rear seat:
adjust the front seat so that the seat does
not touch the child restraint system.
O
When using a category I forward-facing
child restraint system: remove the head
restraint from the respective seat, if possi‐
ble.
When you remove the child restraint sys‐
tem, install the head restraint again immedi‐
ately and adjust all the head restraints cor‐
rectly.
O
The backrest of the forward-facing child
restraint system must, as far as possible, be
resting on the seat backrest of the rear
seat.
O
For certain child restraint systems in weight
category II or III, there may be restrictions in
the maximum size setting, e.g. due to possi‐
ble contact with the roof.
O
The child restraint system must not be put
under strain between the roof and the seat
cushion and/or be installed facing the
wrong direction. Where possible, adjust the
seat cushion inclination accordingly.
O
The child restraint system must not be put
under strain by the head restraints. Adjust
the head restraints accordingly.
O
Make sure that the child's feet do not touch
the front seat. If necessary, move the front
seat forward slightly.
The seat belts on the following seats are equip‐
ped with a special seatbelt retractor:
R
Front passenger seat
R
Rear seats
When enabled, the special seatbelt retractor
ensures that the seat belts of the front
passenger seat and rear seats do not slacken
once the child restraint system is secured
(
→ page 53).
#
Install the child restraint system.
The entire base of the child restraint system
must always rest on the sitting surface of the
rear seat.
#
Always make sure that the shoulder belt
strap is correctly routed from the seat belt
outlet of the vehicle to the shoulder belt
guide on the child restraint system.
The shoulder belt strap must be routed for‐
wards and downwards from the seat belt out‐
let.
58
Occupant safety
Loading ...
Loading ...
Loading ...