Loading ...
Loading ...
Loading ...
*
NOTE Engine damage caused by an
incorrect oil filter, incorrect oil or addi‐
tives
#
Do not use engine oils or oil filters other
than those which meet the specifica‐
tions necessary for the prescribed
service intervals.
#
Do not alter the engine oil or oil filter in
order to achieve longer change intervals
than prescribed.
#
Do not use additives.
#
Have the engine oil changed after the
prescribed intervals.
Mercedes-Benz recommends that you have the
oil change carried out at a qualified specialist
workshop.
Further information on engine oil and oil filters is
available at the following locations:
R
In the Mercedes-Benz Specifications for
Operating Fluids by entering the designation:
-
At http://bevo.mercedes-benz.com
-
In the Mercedes-Benz BeVo app
R
at a qualified specialist workshop
Quality and capacity of engine oil
MB-Freigabe or MB-Approval
Model MB-Freigabe or
MB-Approval
Mercedes-AMG GT 53
4MATIC+
229.51, 229.52,
229.61, 229.71
All other models 229.5, 229.51
Mercedes-AMG GT 63 4MATIC+, GT 63 S
4MATIC+: only use engine oils of viscosity class
SAE 0W-40 or SAE 5W-40.
The following values refer to an oil change,
including the oil filter.
Capacity
Model Capacity
Mercedes-AMG GT 53
4MATIC+
9.0 US qt
(8.5 liters)
All other models 9.5 US qt
(9.0 liters)
Notes on brake fluid
Observe the notes on operating fluids
(→ page 420).
&
WARNING Risk of an accident due to
vapor pockets forming in the brake sys‐
tem
The brake fluid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake fluid. If the boiling point is too low,
vapor pockets may form in the brake system
when the brakes are applied hard.
This causes the braking effect to be
impaired.
#
Have the brake fluid renewed at the
specified intervals.
Have the brake fluid regularly replaced at a
qualified specialist workshop.
Only use brake fluid approved by Mercedes-Benz
according to MB-Freigabe or MB-Approval 331.0.
Technical data
423
Loading ...
Loading ...
Loading ...