Loading ...
Loading ...
Loading ...
#
Position jack 2 at jack support point 1.
#
Turn ratchet wrench 3 clockwise until jack
2 sits completely on jack support point 1
and the base of the jack lies evenly on the
ground.
#
Continue to turn ratchet wrench 3 until the
tire is raised a maximum of 1.2 in (3 cm) off
the ground.
#
Loosen and remove the wheel (→ page 413).
Removing a wheel
Requirements:
R
The vehicle is raised (→ page 411).
Vehicles with AMG ceramic high-perform‐
ance composite braking system:
*
NOTE Damage to the ceramic brake disk
when changing a wheel
Mercedes-AMG vehicles with ceramic
brake disks: during removal and reposition‐
ing of the wheel, the wheel rim may strike
the ceramic brake disk and damage it.
#
Take particular care.
#
Ask another person for assistance or
use a second centering pin.
When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
*
NOTE Damage to threading from dirt on
wheel bolts
#
Do not place wheel bolts in sand or on
a dirty surface.
#
Unscrew the uppermost wheel bolt com‐
pletely.
#
Screw alignment bolt 1 instead of the
wheel bolt into the threading.
#
Unscrew the remaining wheel bolts fully.
#
Remove the wheel.
#
Install the new wheel (→ page 414).
Wheels and tires
413
Loading ...
Loading ...
Loading ...