Loading ...
Loading ...
Loading ...
If autonomous braking or situation-dependent
braking assistance has occurred, display 1
appears in the multifunction display and then
automatically goes out after a short time.
If the autonomous braking function or the situa‐
tion-dependent braking assistance is triggered,
additional preventive measures for occupant
protection (PRE-SAFE
®
) may also be initiated.
&
WARNING Risk of an accident caused by
limited detection performance of Active
Brake Assist
Active Brake Assist cannot always clearly
identify objects and complex traffic situa‐
tions.
In such cases, Active Brake Assist might:
R
Give a warning or brake without reason
R
Not give a warning or not brake
#
Always pay careful attention to the traf‐
fic situation; do not rely on Active Brake
Assist alone. Active Brake Assist is only
an aid. The driver is responsible for
maintaining a suitable distance to the
vehicle in front, vehicle speed and for
braking in good time.
#
Be prepared to brake or swerve if nec‐
essary.
Also observe the system limitations of Active
Brake Assist.
The individual subfunctions are available in
the following speed ranges:
Distance warning function
The distance warning function issues a warning
at speeds:
R
From approximately 4 mph (7 km/h), if your
vehicle is critically close to a vehicle or
pedestrian. An intermittent warning tone
sounds and the · distance warning lamp
lights up in the instrument cluster.
Brake immediately or take evasive action, provi‐
ded it is safe to do so and the traffic situation
allows this.
Driving and parking
171
Loading ...
Loading ...
Loading ...